Installing the monitor:

     1. Before making any connections, be sure that power is off to your computer, display, and all other peripherals.

     2. Always connect your equipment only to properly grounded outlets.

     3. Carefully connect either the analog video cable or the optional DVI cable between your computer and display. Tighten both
         connecting screws at both ends of the cable. Only the analog cable is supplied.

     4. Plug the power cord, connected to the power supply, into the display.

     5. Next, plug the detachable power cord into the power supply and then plug this power cord into a properly grounded
          power outlet having from 100 to 240 Volts AC.

     6. Turn on the display using the Power Switch on the rear side of the display. If the LED on the front, bottom right of the display
         does not light, repeat Steps 3, 4, and 5.

     7. Turn the computer power on. A picture will appear within 15 seconds.



How to access user’s manual on enclosed CD:

     Open the CD manually through Windows Explorer program (The Windows Explorer program can be accessed through Start →
     Program → Accessories → Windows Explorer → My Computer → CD Driver ”HIQ” → Model number of monitor’s folder → Language)